ПРОКЛАДКА ГОЛОВКИ БЛОКА ЦИЛИНДРОВ УЗЛЫ И ДЕТАЛИ

ILLUSTRATION

A012NCJC01
*1 EGR WITH COOLER PIPE ASSEMBLY *2 VACUUM HOSE
*3 NO. 2 OIL COOLER HOSE *4 NO. 2 WATER BY-PASS HOSE
*5 VACUUM TRANSMITTING HOSE *6 GASKET
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part

ILLUSTRATION

A012FI0C01
*1 EGR VALVE (ELECTRIC EGR CONTROL VALVE ASSEMBLY) *2 ENGINE OIL LEVEL DIPSTICK
*3 ENGINE OIL LEVEL DIPSTICK GUIDE *4 NO. 1 EGR COOLER BRACKET
*5 O-RING *6 NO. 4 WATER BY-PASS HOSE
*7 EGR VALVE GASKET *8 NO. 3 WATER BY-PASS HOSE
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
Precoated part - -

ILLUSTRATION

A012FCXC01
*1 INTAKE AIR CONNECTOR WITH DIESEL THROTTLE BODY *2 NO. 2 OIL COOLER HOSE
*3 INTAKE AIR CONNECTOR GASKET *4 HOSE CLAMP
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part

ILLUSTRATION

A012F4XC01
*1 COMMON RAIL ASSEMBLY *2 GLOW PLUG ASSEMBLY
*3 FUEL INLET PIPE SUB-ASSEMBLY *4 NO. 1 GLOW PLUG CONNECTOR
*5 NO. 1 INJECTION PIPE SUB-ASSEMBLY *6 NO. 1 INTAKE MANIFOLD INSULATOR
*7 NO. 2 FUEL HOSE *8 NO. 2 INJECTION PIPE SUB-ASSEMBLY
*9 NO. 3 INJECTION PIPE SUB-ASSEMBLY *10 SCREW GROMMET
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part

ILLUSTRATION

A012FYVC01
*1 INJECTION NOZZLE SEAT *2 INJECTOR ASSEMBLY
*3 NO. 1 NOZZLE HOLDER CLAMP *4 NO. 1 SUPPLY PUMP DRIVE COUPLING
*5 NO. 2 INTAKE MANIFOLD INSULATOR *6 NOZZLE HOLDER CLAMP SEAT
*7 NOZZLE LEAKAGE PIPE ASSEMBLY *8 NOZZLE LEAKAGE PIPE SET CLAMP
*9 SUPPLY PUMP ASSEMBLY *10 NO. 1 FUEL HOSE
*11 O-RING *12 NO. 2 FUEL HOSE
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part

ILLUSTRATION

A012JDKC01
*1 INLET WATER HOSE RH *2 NO. 4 WATER BY-PASS HOSE
*3 WATER BY-PASS PIPE SUB-ASSEMBLY *4 O-RING
*5 OIL COOLER HOSE - -
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part

ILLUSTRATION

A012IMPC01
*A w/ No. 1 Engine Cover    
*1 CRANKSHAFT DAMPER SUB-ASSEMBLY *2 ENGINE COVER BRACKET
*3 GENERATOR ASSEMBLY *4 GENERATOR BRACKET
*5 VACUUM PUMP ASSEMBLY *6 V-RIBBED BELT TENSIONER ASSEMBLY
*7 O-RING *8 TIMING CHAIN COVER OIL SEAL
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
A012M0O MP Grease - -

ILLUSTRATION

A012G0KC01
*A w/o Stop And Start System - -
*1 CAMSHAFT POSITION SENSOR *2 CYLINDER HEAD COVER SUB-ASSEMBLY
*3 HARNESS BRACKET *4 NO. 2 CYLINDER HEAD COVER
*5 GASKET - -
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque - -

ILLUSTRATION

A012JB5C01
*1 ENGINE MOUNTING BRACKET RH *2 HARNESS BRACKET
*3 INLET WATER HOSE LH *4 NO. 2 TIMING CHAIN COVER
*5 TIMING CHAIN COVER SUB-ASSEMBLY *6 OIL PUMP GASKET
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part

ILLUSTRATION

A012HBKC01
*A w/ Stop And Start System - -
*1 CHAIN SUB-ASSEMBLY *2 CHAIN TENSIONER SLIPPER
*3 NO. 1 CHAIN TENSIONER ASSEMBLY *4 NO. 1 CHAIN VIBRATION DAMPER
*5 CAMSHAFT TIMING SPROCKET *6 CRANKSHAFT TIMING SPROCKET
*7 SENSOR PLATE - -
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque - -

ILLUSTRATION

A012FPGC01
*1 CAMSHAFT *2 CYLINDER HEAD SUB-ASSEMBLY
*3 CYLINDER HEAD GASKET *4 NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY
*5 NO. 2 CAMSHAFT BEARING CAP *6 NO. 1 CAMSHAFT BEARING CAP
*7 PLATE WASHER - -
A012IMJ N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
*T1

1st: 50 (510, 37)

2nd: turn 90°

3rd: turn 90°

4th: turn 90°

- -