ДАТЧИК ОБОРОТОВ ТРАНСМИССИИ СНЯТИЕ

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here Нажмите здесь

  2. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь

  3. REMOVE BATTERY

    Click here Нажмите здесь

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click hereНажмите здесь

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here Нажмите здесь

  6. REMOVE TRANSMISSION REVOLUTION SENSOR

    1. Disconnect the wire harness clamp.

      A012LVL
    2. Disconnect the transmission revolution sensor connector.

    3. Remove the bolt and transmission revolution sensor.

      A012I3E
    4. Remove the O-ring from the transmission revolution sensor.