ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ УСТАНОВКА

PROCEDURE

  1. INSTALL INLET AIR TEMPERATURE SENSOR

    1. Install a new gasket to the intake air temperature sensor.

    2. Using a 22 mm ball joint lock nut wrench, install the inlet air temperature sensor.

      A012IIJC01
      *a 22 mm ball joint lock nut wrench
      Момент затяжки
      34.3 N*m  { 350 kgf*cm, 25 ft.*lbf }
      Note:

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench.

      Click here Нажмите здесь

    3. Connect the connector from the inlet air temperature sensor.

  2. INSTALL NO. 1 ENGINE UNDER COVER