INSTALL FRONT CRANKSHAFT OIL SEAL
Apply MP grease to the lip of a new front crankshaft oil seal.
Keep the lip free of foreign matter.
Using SST and a hammer, tap in the front crankshaft oil seal as shown in the illustration.
|0 to 0.6 mm (0 to 0.0236 in.)|
Do not tap in the front crankshaft oil seal at an angle.
Wipe off extra grease on the crankshaft.
INSTALL CRANKSHAFT PULLEY
Align the keyway of the crankshaft pulley with the key located on the crankshaft, then slide the crankshaft pulley into place.
Using SST, hold the crankshaft pulley and install a new crankshaft pulley bolt.
INSTALL V-RIBBED BELT
Click hereНажмите здесь