ГОЛОВКА БЛОКА ЦИЛИНДРОВ РАЗБОРКА

PROCEDURE

  1. REMOVE VALVE STEM CAP

    1. Remove the 8 valve stem caps.

  2. REMOVE INTAKE VALVE

    1. Using SST, remove the 2 valve spring retainer lock halves.

      A012KFUE01
      SST
      09202-70020   ( 09202-00010 )
    2. Remove the valve spring retainer, outer compression spring and intake valve from the cylinder head sub-assembly.

  3. REMOVE EXHAUST VALVE

    1. Using SST, remove the 2 valve spring retainer lock halves.

      A012MGME01
      SST
      09202-70020   ( 09202-00010 )
    2. Remove the valve spring retainer, outer compression spring and exhaust valve from the cylinder head sub-assembly.

  4. REMOVE VALVE STEM OIL SEAL

    1. Using needle-nose pliers, remove the valve stem oil seal.

      A012JF7
  5. REMOVE VALVE SPRING SEAT

    1. Remove the valve spring seat from the cylinder head sub-assembly.

  6. REMOVE VALVE ROCKER ARM PIVOT

    1. Remove the valve rocker arm pivot from the cylinder head sub-assembly.

      A012FQZ
  7. REMOVE NO. 1 WITH HEAD TAPER SCREW PLUG

    1. Using a 6 mm hexagon socket wrench, remove the No. 1 with head taper screw plug and gasket.

      A012HFX