ВАЛ РЫЧАГА ВЫБОРА И ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ ПОВТОРНАЯ СБОРКА

PROCEDURE

  1. INSTALL SELECT STOPPER BLOCK

    1. Coat the select stopper block with gear oil.

    2. Install the select stopper block as shown in the illustration.

      A012FHMN04
      Note:

      Confirm the installation direction.

    3. Using a 5 mm pin punch and a hammer, install the slotted spring pin to the shift and select lever shaft.

      A012HVLC01
      *a Depth
      Driven in Depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)
  2. INSTALL RELEASE HEAD STRAIGHT PIN

    1. Install the release head straight pin to the select stopper block.

      A012JCP
    2. Coat the release head with gear oil.

    3. Install the release head as shown in the illustration.

      A012MQ8N03
      Note:

      Confirm the installation direction.

    4. Install the release head torsion spring as shown in the illustration.

      A012FD6C03
      *a Hook
      *b Hook Side
      *c 14.5 to 15.5 mm (0.571 to 0.610 in.)
      *d 8.3 to 9.3 mm (0.327 to 0.366 in.)
      Note:

      Confirm the installation direction.

    5. Coat the front inner shift lever with gear oil.

    6. Install the front inner shift lever as shown in the illustration.

      A012HBP
      Note:

      Confirm the installation direction.

      Tip:

      Insert the release head torsion spring to the installation hole of the front inner shift lever.

    7. Turn the front inner shift lever counterclockwise to align it with the installation surface of the straight pin, and install it.

      A012GD7C03
      *a Spring
      *b Straight Pin
      Note:

      Confirm that the front inner shift lever is installed as shown in the illustration.

    8. Using a 5 mm pin punch and a hammer, install the slotted spring pin to the shift and select lever shaft.

      A012KEUC01
      *a Depth
      Driven in Depth
      -0.2 to 0.8 mm (-0.00787 to 0.0315 in.)
  3. INSTALL INNER NO. 2 SHIFT LEVER

    1. Coat the inner No. 2 shift lever with gear oil.

    2. Using a 5 mm pin punch and a hammer, install the inner No. 2 shift lever and slotted spring pin to the shift and select lever shaft.

      A012I3RC01
      *a Depth
      Driven in Depth
      0 to 0.6 mm (0 to 0.0236 in.)
      Note:

      Confirm the installation direction.