КОРПУС ДРОССЕЛЬНОЙ ЗАСЛОНКИ ДИЗЕЛЬНОГО ДВИГАТЕЛЯ ПРОВЕРКА БЕЗ СНЯТИЯ С АВТОМОБИЛЯ

PROCEDURE

  1. INSPECT DIESEL THROTTLE BODY ASSEMBLY

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Powertrain / Engine and ECT / Active Test / Diesel Throttle Target Angle / Diesel Throttle / Target Throttle Position and Actual Throttle Position.

      Powertrain > Engine and ECT > Active Test
      Tester Display
      Diesel Throttle Target Angle
    5. Adjust "Diesel Throttle Target Angle" and check that "Actual Throttle Position" changes according to "Target Throttle Position".

      OK
      "Actual Throttle Position" changes according to "Target Throttle Position".