РАСПРЕДВАЛ СНЯТИЕ

PROCEDURE

  1. REMOVE TIMING CHAIN COVER SUB-ASSEMBLY

    Click hereНажмите здесь

  2. REMOVE SUPPLY PUMP ASSEMBLY

    Click hereНажмите здесь

  3. REMOVE NO. 1 CHAIN TENSIONER ASSEMBLY

    Click hereНажмите здесь

  4. REMOVE CHAIN TENSIONER SLIPPER

    Click hereНажмите здесь

  5. REMOVE NO. 1 CHAIN VIBRATION DAMPER

    Click hereНажмите здесь

  6. REMOVE OIL PUMP DRIVE GEAR

    Click hereНажмите здесь

  7. REMOVE CAMSHAFT TIMING SPROCKET

    Click hereНажмите здесь

  8. REMOVE CRANKSHAFT TIMING SPROCKET

    Click hereНажмите здесь

  9. REMOVE CAMSHAFT

    1. Using the crankshaft pulley bolt, set the No. 1 cylinder to 90° BTDC/compression.

      A012HN7
    2. Remove the 2 oil pipe seats.

      A012HDKC03
      *1 No. 4 camshaft Bearing Cap
      *a Oil Pipe Seat
    3. Uniformly loosen the 20 bolts in several steps, in the order shown in the illustration and remove the bolts.

    4. Remove the 8 No. 3 camshaft bearing caps and No. 1 camshaft bearing cap.

      Tip:

      Do not remove the No. 4 camshaft bearing cap.

    5. Remove the camshaft and No. 2 camshaft.

    6. Remove the No. 2 camshaft bearing cap.

      A012LY8
  10. REMOVE NO. 1 VALVE ROCKER ARM SUB-ASSEMBLY

    1. Remove the 16 No. 1 valve rocker arm sub-assemblies.

      A012GQV
  11. REMOVE VALVE LASH ADJUSTER ASSEMBLY

    1. Remove the 16 valve lash adjuster assemblies from the cylinder head.

      A012IDE
      Tip:

      Arrange the removed parts in the correct order.