РАБОЧИЙ ЦИЛИНДР СЦЕПЛЕНИЯ (для моделей с EA66) СНЯТИЕ

PROCEDURE

  1. REMOVE NO. 2 RADIATOR AIR GUIDE

    Click hereНажмите здесь

  2. REMOVE NO. 1 ENGINE UNDER COVER

    Click hereНажмите здесь

  3. REMOVE BATTERY

    Click hereНажмите здесь

  4. REMOVE BATTERY CARRIER BRACKET SUB-ASSEMBLY

    Click hereНажмите здесь

  5. DISCONNECT CLUTCH LINE

    1. Remove the bolt and separate the clutch line clamp from the clutch release cylinder assembly.

      A012JZJ
    2. Using a 10 mm union nut wrench, disconnect the clutch line.

      Tip:

      Use a container to collect the fluid.

  6. REMOVE CLUTCH RELEASE CYLINDER ASSEMBLY

    1. Remove the 2 bolts, clutch release cylinder assembly and clutch line bracket from the manual transaxle assembly.

      A012J84