СИСТЕМА ECD ПРОЦЕДУРА ПОИСКА НЕИСПРАВНОСТЕЙ

DTC Code DTC Name
  HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

*: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result
    Proceed to
    NEXT
    NEXT
  2. CUSTOMER PROBLEM ANALYSIS

    Result
    Proceed to
    NEXT
    NEXT
  3. CONNECT GTS TO DLC3*

    Tip:

    If the display indicates a communication fault in the GTS, inspect the DLC3.

    When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

    Click hereНажмите здесь

    Result
    Proceed to
    NEXT
    NEXT
  4. CHECK DTC AND FREEZE FRAME DATA*

    1. Check for DTCs (Click here) and freeze frame data (Click hereНажмите здесь).

      Tip:

      Record or print DTCs and freeze frame data, if necessary.

      Result
      Proceed to
      NEXT
    NEXT
  5. CLEAR DTC AND FREEZE FRAME DATA

    1. Clear the DTCs and freeze frame data.

      Click hereНажмите здесь

      Result
      Proceed to
      NEXT
    NEXT
  6. CONDUCT VISUAL INSPECTION

    Result
    Proceed to
    NEXT
    NEXT
  7. CONFIRM PROBLEM SYMPTOMS

    1. Confirm problem symptoms.

      Tip:
      • Refer to Problem Symptoms Table.

        Click hereНажмите здесь

      • If the engine does not start, first perform the "Check for DTC" procedures and "Conduct Basic Inspection" procedures below.

      Result
      Result Proceed to
      Malfunction does not occur A
      Malfunction occurs B
    B Нажмите здесь

    GO TO STEP 9


    A
  8. SIMULATE SYMPTOMS

    Tip:

    Refer to Symptom Simulation.

    Click here Нажмите здесь

    Result
    Proceed to
    NEXT
    NEXT
  9. CHECK FOR DTC*

    1. Check for DTCs.

      Tip:

      Refer to DTC Check / Clear.

      Click hereНажмите здесь

      Result
      Result Proceed to
      DTCs are output A
      DTCs are not output B
    B Нажмите здесь

    A
  10. REFER TO DTC CHART

    1. Refer to Diagnostic Trouble Code Chart.

      Click hereНажмите здесь

      Result
      Proceed to
      NEXT
    NEXT Нажмите здесь

    GO TO STEP 13


  11. CONDUCT BASIC INSPECTION

    1. Conduct Basic Inspection.

      Click hereНажмите здесь

      Result
      Result Proceed to
      Malfunctioning parts not confirmed A
      Malfunctioning parts confirmed B
    B Нажмите здесь

    A
  12. REFER TO PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click hereНажмите здесь

      Result
      Result Proceed to
      Malfunctioning circuit confirmed A
      Malfunctioning parts confirmed B
    B Нажмите здесь

    GO TO STEP 16


    A
  13. CHECK ECM POWER SOURCE CIRCUIT

    1. Check the ECM power source circuit.

      Tip:

      Refer to the ECM Power Source Circuit.

      Click hereНажмите здесь

      Result
      Proceed to
      NEXT
    NEXT
  14. CONDUCT CIRCUIT INSPECTION

    Result
    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B
    B Нажмите здесь

    GO TO STEP 17


    A
  15. CHECK FOR INTERMITTENT PROBLEMS

    1. Check for intermittent problems.

      Tip:

      Refer to Check for Intermittent Problems.

      Click hereНажмите здесь

      Result
      Proceed to
      NEXT
    NEXT Нажмите здесь

    GO TO STEP 17


  16. CONDUCT PARTS INSPECTION

    Result
    Proceed to
    NEXT
    NEXT
  17. IDENTIFY PROBLEM

    Result
    Proceed to
    NEXT
    NEXT
  18. ADJUST AND/OR REPAIR

    Result
    Proceed to
    NEXT
    NEXT
  19. CONDUCT CONFIRMATION TEST

    Result
    Proceed to
    NEXT
    NEXT

    END