ТРОС МЕХАНИЗМА ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ СНЯТИЕ

PROCEDURE

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereНажмите здесь

  2. REMOVE NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click hereНажмите здесь

  3. REMOVE BATTERY

    Click hereНажмите здесь

  4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

    Click hereНажмите здесь

  5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click hereНажмите здесь

  6. REMOVE NO. 1 AIR TUBE

    1. Disconnect the 2 wire harness clamps from the manual transaxle assembly.

      A012MGH
    2. Remove the 4 bolts.

    3. Loosen the 2 hose clamps and remove the No. 1 air tube.

  7. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click hereНажмите здесь

  8. REMOVE NO. 1 FRONT FLOOR HEAT INSULATOR

    1. Remove the 3 nuts and No. 1 front floor heat insulator.

      A012HZX
  9. REMOVE REAR CONSOLE BOX ASSEMBLY (for Hatchback, Wagon)

    Click hereНажмите здесь

  10. REMOVE REAR CONSOLE BOX ASSEMBLY (for Sedan)

    Click hereНажмите здесь

  11. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY

    1. Remove the clip, and disconnect the transmission control select cable from the floor shift lever assembly.

      A012N0L
    2. Disconnect the transmission control shift cable from the floor shift lever assembly.

      A012F90
    3. Disengage the 2 claws and separate the transmission control cable assembly from the floor shift lever assembly.

      A012G0U
    4. Remove the 2 clips (A) and disconnect the transmission control cable assembly from the manual transaxle assembly.

      A012KNBN02
    5. Remove the 2 clips (B) and disconnect the transmission control cable assembly from the control cable bracket assembly.

    6. Remove the bolt and disconnect the transmission control cable assembly from the rear engine mounting bracket.

      A012F46
    7. Remove the 2 nuts and transmission control cable assembly from the vehicle exterior.

      A012G4E