ECM УСТАНОВКА

PROCEDURE

  1. INSTALL NO. 2 ECM BRACKET

    1. Install the No. 2 ECM bracket to the ECM with the 2 screws.

      Момент затяжки
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
  2. INSTALL NO. 1 ECM BRACKET

    1. Install the No. 1 ECM bracket to the ECM with the 2 screws.

      Момент затяжки
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
  3. INSTALL ECM

    1. Install the ECM with the 2 bolts.

      Момент затяжки
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }
    2. Connect the 2 connectors from the ECM, and lower the 2 levers.

      Note:
      • When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.

      • Make sure that the 2 levers are securely lowered.

  4. INSTALL NO. 1 AIR CLEANER INLET

    1. Install the No. 1 air cleaner inlet with the bolt.

      Момент затяжки
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }
  5. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here Нажмите здесь

  6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

    Click here Нажмите здесь

  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here Нажмите здесь

  8. INSTALL NO. 1 ENGINE COVER (w/ No. 1 Engine Cover)

    Click here Нажмите здесь

  9. PERFORM REGISTRATION

    Click hereНажмите здесь

  10. PERFORM INITIALIZATION

    Click hereНажмите здесь