ДАТЧИК ТЕМПЕРАТУРЫ ОХЛАЖДАЮЩЕЙ ЖИДКОСТИ ПРОВЕРКА

PROCEDURE

  1. INSPECT ENGINE COOLANT TEMPERATURE SENSOR

    1. Measure the resistance according to the value(s) in the table below.

      A012KDMC01
      *a

      Component without harness connected

      (Engine Coolant Temperature Sensor)

      *b Resistance (kΩ)
      *c Temperature °C (°F)
      *d Acceptable Range
      Standard Resistance
      Tester Connection Temperature Condition Specified Condition
      1 - 2 Approximately 20°C (68°F) 2.32 to 2.59 kΩ
      Approximately 80°C (176°F) 0.310 to 0.326 kΩ
      Note:

      When checking the engine coolant temperature sensor in water, do not allow water to contact the terminals. After checking, dry the sensor.

      If the result is not as specified, replace the engine coolant temperature sensor.