ПЕДАЛЬ АКСЕЛЕРАТОРА УСТАНОВКА

PROCEDURE

  1. INSTALL ACCELERATOR PEDAL SENSOR ASSEMBLY

    Note:
    • Avoid physical shock to the accelerator pedal sensor assembly.

    • Do not disassemble the accelerator pedal sensor assembly.

    • The accelerator pedal sensor assembly does not require lubrication.

    • Do not apply oil or other lubricants to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.

    1. Install the accelerator pedal sensor assembly with the 2 bolts.

      Момент затяжки
      8.7 N*m  { 89 kgf*cm, 77 in.*lbf }
    2. Connect the accelerator pedal sensor assembly connector.