ГЕНЕРАТОР СНЯТИЕ

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click here Нажмите здесь

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here Нажмите здесь

  3. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH

    Click hereНажмите здесь

  4. REMOVE V-RIBBED BELT

    Click hereНажмите здесь

  5. REMOVE GENERATOR ASSEMBLY

    1. Remove the terminal cap.

      A012MLE
    2. Disconnect the connector.

    3. Remove the nut and bolt, and disconnect the wire harness from terminal B.

    4. Remove the 3 bolts and generator assembly.

      A012K1W