ПРОКЛАДКА ГОЛОВКИ БЛОКА ЦИЛИНДРОВ СНЯТИЕ

PROCEDURE

  1. REMOVE CAMSHAFT

    Click hereНажмите здесь

  2. REMOVE EXHAUST MANIFOLD AND TURBOCHARGER SUB-ASSEMBLY

    Click hereНажмите здесь

  3. REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY

    Click hereНажмите здесь

  4. REMOVE FUEL INJECTOR SEAL

    Click hereНажмите здесь

  5. REMOVE NO. 1 GLOW PLUG CONNECTOR

    Click hereНажмите здесь

  6. REMOVE GLOW PLUG ASSEMBLY

    Click hereНажмите здесь

  7. REMOVE CYLINDER HEAD SUB-ASSEMBLY

    1. Uniformly loosen the 10 cylinder head set bolts in several steps, in the order shown in the illustration.

      A012FVGN01
    2. Remove the 10 cylinder head set bolts and plate washers.

      Note:

      Head warpage or cracking could result from removing bolts in the incorrect order.

  8. REMOVE CYLINDER HEAD GASKET

    1. Remove the cylinder head gasket.